Orientation
Orientation - Continued
Design and Drawing
Gourd Preparation
The Neck
-
Headstock Design (7:05)
-
Gourd to Neck Measurement (3:37)
-
Neck Design, Front View (8:17)
-
Neck Design, Side View (7:28)
-
Cutting the neck (18:15)
-
Gluing and Clamping the back of the neck (7:43)
-
Tailpiece Making (14:44)
-
Drilling the Tailpiece (12:01)
-
Shaping the Neck (Tools) (15:07)
-
Shaping the Neck with a Rasp (28:47)
-
Surfacing the Dowel (22:09)
-
Surfacing the Neck (16:26)
-
Carving the back, below the Headstock (6:45)
-
Refining and Surfacing (13:44)
-
Drilling Peg Holes (12:16)
-
Fitting the Pegs (22:38)
-
Bone Nut (12:45)
-
Fit the Nut into the Neck (13:04)
-
Surfacing the Nut (9:38)
Fitting Neck to Gourd
Final Finishing of Neck
Set-up and Assembly
Present Your Finished Piece
